Izinto eziphambili kwindawo yofakelo lomshicileli we-UV flat-panel ziquka iinkalo ezisixhenxe: ukukhanya, ubushushu, ukuhamba komoya, umbane, iingcingo, umhlaba kunye neemfuno zothuli.Ngethuba lenkqubo yokufakela, kuyimfuneko ukulandela ngokungqongqo imigangatho yokuqinisekisa ukufakwa kunye nokusetyenziswa komatshini.
1. Iimfuno zokukhanya kwendawo:
I-inki ye-UV ine-arhente yokunyanga ye-UV.Ukukhanya kwendalo okanye ukukhanya kwe-ultraviolet ye-LED kwindawo yokusebenza kuya kubangela ukunyangwa kwe-inki.Ukuze kwandiswe ubomi benkonzo yomlomo, umshicileli we-UV flat-panel kufuneka athathe amanyathelo okuthintela ukukhanya kwendalo kwisiza.Umthombo wokukhanya kwisayithi unokubonelelwa ngesibane se-incandescent okanye isibane sokugcina amandla e-LED.
Ukufakela umshicileli wepaneli ye-UV flat
2. Iimfuno zobushushu be-Ambient:
Ubushushu obucetyiswayo bendawo yokugcina kunye nokusetyenziswa kwe-inki ye-UV yi-18 ukuya kwi-25 ℃, kwaye ukufuma kulawulwa kwi-55% - 65%.Gwema umthombo womlilo kunye nokusingqongileyo okuphezulu kobushushu, kwaye ubeke ingqalelo kukhuseleko lokugcinwa kunye nokusetyenziswa kwendawo.
3. Iimfuno zokuhamba komoya kwindawo:
I-inki ye-UV iya kuba nevumba elibi.Nceda uthathe amanyathelo okungenisa umoya kwindawo evaliweyo.Ukuba kukho izixhobo ezincedisayo zokufudumeza okanye zokujikeleza komoya kwisiza, ukuhamba komoya okwenziwa seso sixhobo akunako ukukhomba kwitafile yesishicileli se-UV flat-panel.
4. Iimfuno zothuli lokusingqongileyo:
Uthuli oluninzi kunye noboya kwindawo yokusebenza yomshicileli we-UV flat-panel kunokukhokelela kukusilela kwesekethe yebhodi kunye nokuvaleka kwemilomo.Kwiimeko ezinzulu, kuya kukhokelela kwi-inki ash, kuchaphazela umphumo wokushicilela kunye nokonakalisa umbhobho.Nceda ucoce isiza.
5. Iimfuno zamandla esayithi:
Umbane oqhelekileyo we-AC we-220V / 50Hz uya kubonelelwa yi-UV flat-panel printer kwisiza, kwaye ukuguquguquka kwamandla ombane kuya kuba ngaphantsi kwe-2.5%;Umgca uya kubandakanya ucingo oluthembekileyo olusekelwe phantsi, kwaye ukuchasana kwesikhokelo kumhlaba kuya kuba ngaphantsi kwe-4 ohms.Iya kuxhotyiswa ngenkqubo yobonelelo lwamandla ezimeleyo kwaye ayisayi kuxutywa nezinye izixhobo.
6. Iimfuno zendlela yesiza:
Kwindawo yocingo lwendawo yomshicileli wepaneli ye-UV, i-trunking iya kusetyenziswa ngokufanayo, kwaye unxibelelwano lwesixhobo kunye neentambo zombane aziyi kunyathelwa.Ukuba uhamba phantsi, kufuneka ufake igobolondo ekhethekileyo yokukhusela kumgca ukuze ugweme ukugqoka kwesikhumba socingo kunye nokuvuza kombane emva kwexesha elide.
7. Iimfuno ezisisiseko:
Umhlaba apho umshicileli wepaneli ye-UV flat ifakwe kufuneka ibe tyaba, kwaye akufanele kubekho ukuchithwa komhlaba, ukudandatheka kunye nezinye iimeko, eziya kuchaphazela ukusebenza okuqhelekileyo kwesixhobo kwisigaba esilandelayo.
